| Rated input | 850 W |
| Weight | 8.82 lb |
| Frequency | 50/60 Hz |
| Radio and television interference suppression | Yes |
| Interference immunity | Yes |
| Protection class | double insulated (class II); grounded (class I) |
| Constant speed motor electronics | No |
| Setting tool | TE-C connection end |
| Variable speed switch | No |
| Constant-On Switch | No |
| AVR - Active Vibration Reduction | Yes |
| TPS - Theft Protection System | No |
| Depth Gauge | Yes |
| Chuck interface | Yes |
| Number of Gears | 1 |
| Service indicator | No |
| Chisels | TE-C connection end |
| Triaxial vibration for chiseling in concrete | 11 m/s² |
| Uncertainty (K) for triaxial vibration value for chiseling ( | 1.5 m/s² |
| Triaxial vibration value for hammer drilling into concrete ( | 12 m/s² |
| Un. (K) for tri. vibr. value for hammer drilling into concre | 1.5 m/s² |
| A-weighted sound power level acc. EN 60745 | 101 dB (A) |
| A-weighted emission sound pressure level acc. EN 60745 | 90 dB (A) |
| Uncertainty for the given sound level acc. EN 60745 | 3 dB (A) |
| Dimensions (L x W x H) | 14.13 x 3.7 x 8.4 in |
| Weight Class | 6.6 lb |
| Working modes | Hammering & Rotating, Rotating only, Chiseling |
| Reduced impact energy | No |
| Single impact energy | 2.4 ft-lbs |
| Blows per minute | 4080 impacts/minute |
| Contact Force (Imperial) | 18lbf |
| Chiseling performance | 20.7 cu. in/min |
| Reverse Switch | Yes |
| Speed 1 No Load | 750 rpm |
| Drilling performance - Diameter 1 (Imperial) | 0.5 in |
| Drilling performance - Drilling depth 1 in 1 minute (Imperia | 3.8 in³/min |
| Drilling performance - Diameter 2 (Imperial) | 0.6 in |
| Drilling performance - Drilling depth 2 in 1 minute (Imperia | 4.8 in³/min |
| Drilling performance - Diameter 3 (Imperial) | 0.8 in |
| Drilling performance - Drilling depth 3 in 1 minute (Imperia | 3.5 in³/min |
| Optimum drilling diameter in concrete (Imperial) | 0.4 in - 0.8 in |
| Maximum drilling diameter range for hammer drill bits - rang | 0.2 in - 1.1 in |
| Maximum drilling diameter range for percussion core bits - r | 2.6 in - 3.9 in |
| Max. drilling diameter range for metal drill bits - range (I | 0.0625 in - 0.5 in |
| Max. drilling diameter range for wood drill bits - range (Im | 0.2 in - 0.8 in |
| Max. drilling dia. range for forming and inst. drill bits - | 0.1 in - 1.2 in |
| Lifetime Service No Cost Period | 2 years |
